Injector settings
1. opening pressure settings:
                    Set                      check
new        3820±40 psi        3740 psi min.
              (263.5±2.8 bar)    (257.5 bar)
Service    3620±40 psi        3410 psi min.
             (249.5±2.8 bar)     (235 bar)
2. valve lift: turn 7/8  1/16 .0156 (0.4mm) nominal
3. spray orifice size: .0116 (0.295mm)
4. spray orifice number: 4
5. sac type: tapered mini
6. check nozzle “chatter” per pencil nozzle service
manual 99002, service bulletin 467 & 467a.
If acceptable proceed to step 7.
7. return oil leakage: 1 to 14 drops / 30 seconds max. At 1500 psi (service only).
Settings for new nozzle or when a new pressure adjusting spring is used.