The 2 suspended inspection (Dieselpartsworld) 2016-02-28    

Then check the car deviation how to repair it
The 2 suspended inspection
Look at the front suspension spring is broken, so elastic shock absorber is consistent. When the tire pressure is equal, look back from the front, should check the low side of the suspension spring, if broken should be replaced; if no break is the spring is too soft or arch is not enough, should replace the whole suspension spring.
Under normal circumstances, the car due to the suspension system failure, resulting in the deviation of the probability is very low, because before delivery vehicles have been manufacturers strict detection and adjustment.
But does not rule out the original design, such as suspension of the guide rod and steering tie rods the movement interference will affect the vehicle deviation.
The former is due to manufacturing, adjusting produce errors, the latter is due to the original design result, and the latter is caused by right deviation. For reasons of the deviation of the old car is more, in addition to the above, frame deformation, displacement of front axle, negative before the beam and the vertical arm, two front leaf spring shrapnel is not the same, and horizontal and vertical rod ball head pin Songkuang etc. will cause deviation, so the old but also specific analysis.