To prevent the vehicle sideslip (Dieselpartsworld) 2016-02-28    

To prevent the vehicle sideslip
Maintenance of sideslip substandard vehicles, to Youyidaonan gradually.
First before the inspection surface and the tire pressure is normal, pull rod ball head is loose, observe the wheelbase deviation; confirm the normal after before adjustment beam, thereby eliminating for front wheel, a hanging device and a steering mechanism and gap on the impact of a toe in value. If the above check and adjust, still unqualified, further check the main pin and the frame.
The structure and principle of sideslip test-bed
Is the sideslip of camber and front wheel before the beam interaction results, car through the slide plate can only move laterally observed camber and toe of the slide horizontally pushing role.
Sideslip test: sliding plate roller and guide mechanism. Slide left and right, before and after the limit. With 500, 800 and 1000mm, 1mm for m/km sideslip.
The double rocker mechanism the two plates inside and outside the equivalent shift, shared return device.
The locking device can make it real.
Measuring device: potentiometer, differential transformer, synchro motor.
Diagnostic parameters: m/km, 5m/km: Extreme
Single plate test bench can separate measurement of single wheel sideslip.
Double slide test bed can also reflect the single wheel sideslip