The detection of automobile front wheel sideslip (Dieselpartsworld) 2016-02-28    

The detection of automobile front wheel sideslip
Automobile front wheel sideslip detection is the sideslip detector, in accordance with the relevant provisions in the GB7258 - 1997 the operation of a motor vehicle safety technical conditions "to judge, requirements of the vehicle front wheel side slip is less than 5m/km.
(1) before detection. Connect the sideslip detector power preheat for half an hour, and the instrument for self; be seized a car tire pressure should conform to the standard; to remove the tire on the stick of some oil, water stains or tread grooves inside the small stones.
(2) detection method. The vehicles driving along the line to 3 ~ 5km/h speed uniform through sideslip detector skateboard.
(3) detection. Detection speed must be controlled within the scope of the provisions of, and the front wheels smoothly through the sideslip detector; when through the wheel sideslip detector shall not steering and braking, cannot make over sideslip detector allows the loading of the car on a skateboard.
(4) detection and analysis. The current round of the sideslip detector plate outward moving (sideslip is positive), show that the wheel before the beam is too large or negative camber is too large; if the slide moves inward (sideslip is negative), indicating that the camber is too large or negative before the beam is too large; if the plate does not move, indicating that the wheels do not slip amount, toe and camber with the right.