Method for towing manual transmission vehicle  (Dieselpartsworld) 2016-01-19     

Method for towing manual transmission vehicle:
Before starting the traction, the 2 or 3 block is hung up, and the clutch pedal.
Open ignition switch.
When the two cars are moving, loosen the clutch pedal.
And after starting the engine, the clutch pedal, hang into neutral, and avoid the tractor collided.
Note the traction front wheel drive automatic transmission
The shift lever should be in the "N" position.
Traction speed is not more than 50km/h
Traction distance can not be more than 50km, if the traction distance of more than 50 km, the front wheel should be lifted off the ground. When the engine is stopped, the transmission oil pump does not work, if the traction speed is too large or too long, the transmission can not get good lubrication.
If the rescue crane traction car, only the front wheel will lift the car off the ground. Because the rear lift of the car, the drive shaft is reverse rotation, which will lead to the automatic transmission of planetary gear speed is too high, the transmission will be seriously damaged in a short time.
Traction four wheel drive manual transmission car attention:
A rescue crane traction, lifting rear axle or axle.
Traction speed is not more than 50km/h.
Traction distance can not be more than 50 km.
Four wheel drive automatic transmission vehicle attention:
The shift lever is placed in the "N" position.
Traction speed is not more than 50km/h.
Traction distance can not be more than 50km.
If the traction rescue crane, before and after the bridge shall be lifted off the ground.